K-80 Pro Sporter

K-80 Pro Sporter

K-80 PRO SPORTER – CONÇU POUR LA VICTOIRE

Présentation du nouveau K-80 Pro Sporter.
Le K-80 Pro Sporter est doté d’une bande visée flottante plus haute que les fusils de compétition Sporting et Skeet conventionnels.

La conception d’une bande visée haute et la crosse plus haute correspondante permettent au tireur de garder sa tête dans une position plus droite sur la crosse, augmentant la portée de visée et permettant une acquisition plus rapide de la cible, une fatigue du cou réduite et un recul perçu réduit.

Une molette de réglage spécialement conçue installée au bout de la bande permet au tireur de sélectionner un Point d’Impact de tir à plat 50/50 ou un Point d’Impact 60/40 légèrement plus élevé en utilisant une image de visée grain derrière grain.
Les deux paramètres de Point d’Impact sont des approximations et peuvent différer légèrement. Un Point d’Impact plus élevé de 70/30 est également possible en utilisant une image de visée en huit.
Changer votre Point d’Impact selon vos préférences personnelles est aussi simple que d’utiliser la molette de réglage sur la bande de visée du Pro Sporter.
En desserrant la vis de réglage et en abaissant la bande, vous pouvez obtenir un Point d’Impact plus élevé.

Le K-80 Pro Sporter fait la transition facilement entre toutes les disciplines offrant la polyvalence et les performances de Krieghoff.

CANON	:	Calibre 12, chambré 76 mm Calibre 20, chambré 76 mm Calibre 28, chambré 76 mm Alésage .410, chambré 76 mm
VISÉE	:	76 ou 81 cm Bande flottante réglable Fuyante de 12 à 8 mm
BOIS	:	Crosse Parcours droitier ou gaucher Busc réglable Renflement de la paume Longuesse Parcours.

The K-80 Pro Sporter features a Floating Rib suspended higher above the barrel than conventional Sporting Clays and Skeet competition shotguns.

The higher rib design and corresponding higher stock allow the shooter to keep their head in a more erect position on the stock, thereby increasing sight range and allowing for quicker target acquisition, reduced neck fatigue, and reduced perceived recoil.
A specially designed adjustment wheel fitted to the rib allows the shooter to select a flat shooting 50/50 POI or a slightly higher 60/40 POI by using a sight picture of bead behind bead.

Both POI settings are approximations and can differ slightly. A higher POI of 70/30 is also possible by using a figure eight sight picture.
Changing your POI to your personal preferences is as simple as using the adjustment wheel on the rib of the Pro Sporter.
By loosening the set screw and lowering the rib down you can achieve a higher POI.

The K-80 Pro Sporter transitions easily between all of the clay target disciplines offering the versatility and performance of Krieghoff.

GAUGES	:	12 Gauge; 3” chambers 20 Gauge; 3" chambers 28 Gauge; 3" chambers .410 Bore; 3" chambers
BARREL LENGTHS	:	30” or 32”; Adjustable Floating Rib 12-8mm Taper
STOCK	:	Right-handed or Left-handed “Pro-Sporting” stock with adjustable comb, palm swell and “Schnabel” forearm.

CARACTÉRISTIQUES

Les canons de calibre 12, 20, 28 et .410 sont dotés d’une chambre chromée de 76 mm.
Bande de visée plates fuyante de 12 à 8mm.
2 mires, l’une en acier au centre de la bande de visée et l’autre blanc perle au bout des canons.
5 Shokes d’usine en titane à visser avec clé de serrage (offre standard SK/IC, LM, M, IM).
Bascule en acier trempé nickelé, finition gris satiné.
Détente mécanique sélective unique, réglable en longueur. Pression sur la détente +/- 1.70 kg.
Sécurité du bouton-poussoir supérieur. Peut être verrouillé en position «off».
Bois en noyer turc sélectionné, quadrillage fin, finition époxy satinée.
Bois grade #3 Pro Sporting.
Longuesse ergonomique avec prise en main naturelle et assurée.
Finition epoxy satinée.
Malette Krieghoff Negrini.

12ga, 20ga, 28ga and .410 barrels feature a 3“ chrome chamber
30″or 32”: 12mm Tapered Flat Rib
Extended factory screw-in chokes, incl. five titanium choke tubes and choke wrench (Standard offering SK/IC,LM,M,IM)
White pearl front bead and metal center bead
Hardened, nickel plated steel receiver with satin grey finish
Single selective mechanical trigger, adjustable for finger length. Trigger pull: Approximately 3-3/4 lbs.
Top tang push button safety. Can be locked in “off“ position
Fine-checkered select Turkish walnut with satin epoxy finish
Standard: #3 Pro-Sporting Stock
Schnabel Style Forend
Stock Finish: SEF (Satin Epoxy Finish)
Krieghoff Negrini one barrel case

options

I am text block. Click edit button to change this text. Lorem ipsum dolor sit amet, consectetur adipiscing elit. Ut elit tellus, luctus nec ullamcorper mattis, pulvinar dapibus leo.

English version

TITANIUM – OPTIONS

Titanium trigger, trigger group made of steel
Titanium Front Hanger
Nine Titanium screw-in chokes

TITANIUM – OPTIONS, BLACK

Titanium trigger, trigger group made of steel, matt black
Titanium Front Hanger, matte black
Nine Titanium screw-in chokes, matte black

TITANIUM – OPTIONS, GOLD PLATED

Titanium trigger, trigger group made of steel, gold plated
Titanium Front Hanger, gold plated
Nine Titanium screw-in chokes, gold plated

MATCHED PAIRS

A Matched Pair of guns is possible. An up-charge of 10% is required with any order of a matching pair.
This includes consecutive numbers and Stocks matching in color, figure and weight. Both guns are identically balanced.

KRIEGHOFF BALANCE SYSTEM

The barrel can be provided with up to three additional 1.4 oz weights underneath the forend, thus making an increase of 4.2 oz at the front end possible.
The buttstock can be equipped with a special stock bolt, which is 1.4 oz heavier than a standard stock bolt, and can accept up to three additional 1oz weights. Thus, making buttstock up to 4.4 oz heavier.

GAUGE

12 Gauge (3″), chambers are chrome plated
20 Gauge (3″), chambers are chrome plated
28 Gauge (3″), chambers are chrome plated
0410 Bore (3″), chambers are chrome plated

BARREL

30″
32″

KRIEGHOFF BALANCE SYSTEM – BARREL WEIGHT

The barrel can be provided with up to three additional 1.4oz weights underneath the forend, thus making an increase of 4.2oz at the front end possible.

BARREL PORTING

Available from the factory for 12 Gauge barrels to reduce felt recoil and muzzle jump.

KRIEGHOFF HIVIZ PRO

High Visibility fiber optic optional shotgun sight

INTERCHANGEABLE BARREL SETS

K-80 Pro-Sporting, with screw-in chokes: Barrel length: 30″ or 32″; Adjustable Rib, 12mm-8mm taper; free-floated barrel set

The K-80 can be fitted with all available K-80 barrel sets. However, it should be noted that due to the different levels of top rib, the stock must be adjusted accordingly, or must also be replaced.

EXTENDED FACTORY SCREW-IN CHOKES

Additional Krieghoff Titanium Extended screw-in chokes are available in 12 Gauge & 20 Gauge in constrictions ranging from Cylinder (.000″) to Super Full (.040″). Also, available in steel are the Krieghoff Steel Extended screw-in chokes for 28 Gauge and .410 Bore.

Chokes are available in the following constrictions:

Number	Marking	Size	Constriction
00	CYL	Cylinder	.000″
0	SK	Skeet	.005″
1	IC	Improved Cylinder	.010″
1+	LM	Light Modified	.015″
2	M	Modified IM	.020″
2+	LIM	Light improved Modified	.025″
3	IM	Improved Modified	.030″
4	F	Full	.035″
5	SF	Super Full* (12 Ga Only)	.040″

Fixed Choke barrels can be modified to fit aftermarket screw-in choke tubes, however they must be a “thin-wall” type of choke tube. The original Krieghoff Titanium Extended screw-in choke tubes cannot be added to fixed choke barrels.

RECEIVER FINISH OPTIONS

Nickel plated receiver finish. Nickel is our most durable finish option for a receiver. The nickel resists corrosion and provides a great finish for hard use. Nickel is not available in conjunction with Gold Plating.
Blued receiver finish. The Krieghoff Blued finish is a deep black color and provides a traditional look to a modern gun.
Nitrated receiver finish. A nitrated finish is common on heavily engraved guns, especially with gold inlays and custom engravings. The nitrated finish provides a coin-grey finish and is easy to maintain.
Color case hardened finish. Color case hardening is one of the original gun finishes available for fine shotguns. With variations of blues, grays and straw colors the process makes a unique finish each time. Less durable than Nickel or Nitrated finishes we finalize the finish with a clear lacquer to provide an additional layer of protection.

LOCK FINISH OPTIONS

Internal lock parts nickel plated
Internal lock parts gold plated, triggers not included and must be specified
Titanium trigger (including trigger group), gold plated
Titanium trigger; trigger group made of steel; gold plated
Titanium trigger; trigger group made of steel, black

ENGRAVING OPTIONS

Standard Engravings
Custom Engravings

WOODSTOCK CATEGORY

Standard Grade
Category 001 (CAT001)
Category 002 (CAT002)
Category 003 (CAT003)
Category 004 (CAT004)
Category 005 (CAT005)
Exhibition or Custom
°A custom fit stock is almost entirely hand made with only minimal pre-machining. A typical stock dimensions and longer stock lengths generally require a custom fit stock. Further information on request.

EXCLUSIVE WOOD CATEGORIES AS STOCK BLANKS (HAND-CRAFTED)

Due to the high cost of raw materials, wood grades higher than CAT005 often require a custom-made stock. The exclusive Exhibition stock blanks are limited. Therefore the availability cannot be guaranteed.

LEFT-HANDED STOCK

Left-handed stocks available.

HAND-CRAFTED STOCK

Custom made stock with ergonomic grip and finger grooves as well as an adjustable butt plate
Buttstock with standard dimensions
Buttstock with special dimensions, made to customer’s specifications
Forearm with standard dimensions
Forearm with special dimensions, made to customer’s specifications, beavertail or semi-beavertail forearm

WOOD STOCK FINISH OPTIONS

Satin Epoxy Spray Finish (Standard)
High Gloss Epoxy Spray Finish
Open Pore Oil Finish is a matte oil-rubbed finish with open grain
Tru Oil Finish is a glossy oil-rubbed finish with closed pores & grain

MONOGRAM PLATE

Inlet into pistol grip cap
Steel pistol grip cap fully covering

MONOGRAMS

Two letters engraved
Two letters engraved in relief style
Two letters in silver
Two letters in gold

KRIEGHOFF BALANCE SYSTEM – STOCK WEIGHT FOR K-80

The buttstock can be equipped with a special stock bolt, which is 1.4oz heavier than a standard stock bolt, and can accept up to three additional 1oz weights.

ADJUSTABLE BUTT PLATE

Adjustable butt plate available.
Note: Fitting may require removing up to 3/4″ of the buttstock to maintain the same LOP.

LENGTH OF PULL ADJUSTMENT OPTION

For K-80s with #6 and Trap Special buttstocks the length of pull (LOP) can be easily adjusted with the addition of optional pre-fitted 1/4″ spacers. Other stocks can easily be adjusted for LOP with a Krieghoff Adjustable Butt Plate and pre-fitted spacers.

gravures

Nous disposons d’une proposition très importante de gravures pour tous les budgets et les goûts de chacun des tireurs. Celles et ceux qui le souhaitent peuvent faire personnaliser leur fusil avec un thème qui leur est propre.

Accédez à la page GRAVURES

accessoires

KRIEGHOFF présente une gamme étendue d’accessoires, de l’entretien à la petite personnalisation en passant par les gammes textiles et bagagerie et bien d’autres …

Accédez à la page ACCESSOIRES

* AVERTISSEMENT : De par leur nature certains produits à densité variable, des textures bois toutes différentes, du travail artisanal effectué, des évolutions permanentes des produits, les photos et caractéristiques ci-dessus sont à titre de renseignements et ne sauraient être considérées contractuelles pour une transaction. Renseignez vous auprès de la Direction pour de plus amples précisions avant validation de votre projet.